Semiconductor Test PCR (High Frequency >70GHz)

Excellent with high frequency. Can be used under >70GHz.

Fine pitch, as small as 0.1mm.

Stable contact resistance, with average resistance of 20mΩ.

Long life cycle (Over 1,000,000 touchdowns).

Can be used for burn-in tests. Wide temperature range (-50~+210℃).

Current rating: 10A (0.5mm2/pad)(TPSPCR-127~TPSPCR-065)

 

Structure

 

TPSPCR_150527.jpg

 

 

Pitch and Gap.jpg

 

Mechanical Specification

Order code Pitch (mm) Gap ※1(mm) Minimum pad area ※2(mm2) Minimum pad height ※3(mm) Sheet thickness (mm)
TPSPCR-127  1.27 0.51 0.46 0.07112 0.38
TPSPCR-100 1.00 0.40 0.28 0.07112 0.25
TPSPCR-080 0.80 0.32 0.18 0.05334 0.22
TPSPCR-065 0.65 0.26 0.12 0.05334 0.17
TPSPCR-050 0.50 0.20 0.071 0.03556 0.14
TPSPCR-040 0.40 0.16 0.045 0.03556 0.11
TPSPCR-030  0.30
0.12 0.025 0.02667 0.09
TPSPCR-020

0.20 

0.08 0.011 0.01778
0.06
TPSPCR-010 0.10
0.04 0.0028 0.01778 0.05

※1~3 Pitch, Gap and Minimum Pad Area values are required dimensions on your DUT pad.
※1 Gap is the required spacing between 2 pad areas on the DUT pad surface. Gap applies to pads on both surfaces.
※2 Pad area is the projected inter-connecting area between opposing pads.  For example, if you sandwich the TPSPCR between PCB pad and DUT pad, it refers to the common area in which both the PCB pad and the DUT pad are contacting the TPSPCR.
※3 Pad height includes the total height of opposing pads.

 

 

 

◎For your order, please write down the order code in the chart above. Thank you.


※Specifications are subject to change without notice.



  • Inquiry
  • Product
  • Download
  • Privacy Policy
  • Sitemap