Anisotropic Conductive Rubbers

Matrix Series ACR – gold plated, metal wire type

Gold-plated metal wires are arranged at equal intervals in silicone rubber.
Suitable for semiconductor inspection such as BGA, LGA, QFP, QFN.

The Matrix series has excellent high frequency transfer characteristics due to its short conduction path, and its repeatability is greatly improved compared to general elastomer connectors. It is used for inspection of RF devices such as semiconductors from CPUs to high frequency filters.

TPSPCR Semiconductor Test PCR (RF >70GHz)

Metal particle contacts are arranged in silicon rubber. Suitable for semiconductor test of gold-plated flat pads such as QFN and LGA.

  • Excellent RF performance. Can be used at >70GHz.
  • Fine pitch, as small as 0.1mm.
  • Stable contact resistance with average resistance of 20mΩ.
  • Wide temperature range (-50~+180℃). Can be used for burn-in tests.
  • High current use of 0.25 to 40A
  • Standard sheet size of 26 x 26 mm. Please contact us for custom sizes.

FM type Pressurization conductive film for semiconductor package test

A full custom solution – creating contact points in accordance with the pad position of the chip.
Suitable for semiconductor test such as BGA, LGA, QFP, QFN.

  • Excellent in RF transmission
  • Fine pitch
  • Excellent cost performance
  • Does not damage packages (gold pad, solder ball, solder printing bump).
  • Easy maintenance / one-touch replacement.

IR type Compound sheet (FM+Matrix)

A combination of FM type and Matrix. (A full custom solution.) Suitable for semiconductor test.

  • The compound sheet (IR type) is an ACR which makes the best use of characteristics of both the Matrix series and the FM type ACRs.
  • Achieves high-precision contact with a low contact load.
  • Maintenance cycle can be improved.
  • Contact quality and life cycle can be improved.

NMMatrix ACR – metal wire nonmagnetic type

Completely non-magnetic version of the Matrix series. Suitable for semiconductor test such as magnetic sensors.

The NMMatrix series has excellent high frequency transfer characteristics due to its short conduction path, and its repeatability is greatly improved compared to general elastomer connectors. It is used for inspection of RF devices such as semiconductors from CPUs to high frequency filters.

CT-JTA, CT-JTU Elastomeric Connector

CT-JTA type

Gold-plated metal wires are arranged at equal intervals in silicone rubber. Suitable for board-to-board connection arranged in a row such as LCD.

CT-JTA consists of tightly spaced metal wire array and silicone that sandwiches the wire array.

Excellent contact resistance realizes stable contacts.

HBP-0.68-L18.5-F0.55 (Center Pitch: 1.27mm)

  • Probe with a conductive rubber molded on the tip, making a soft touch to avoid scratch on DUT.
  • Maximum travel: 4.2mm
  • Recommended travel: 2.8mm
  • Spring force @ recommended travel: 50gf