F822 (Center Pitch: 5.50mm/216mil)
F822 (Center Pitch: 5.50mm/216mil)
- Maximum stroke: 3.5mm
- Maximum stroke: 3.0mm
- Spring pressure at recommended stroke: 200gf
- Initial spring pressure: 100gf
Probe (mm)
F822 (Center Pitch: 5.50mm/217mil)
F822 (Center Pitch: 5.50mm/217mil)
Recommended drill size
| Material | Drill φ (mm)
(With Nar) |
Drill φ (mm)
(No narration) |
| EP 105 (CEM1, Trolitax) | 4.70-4.72 | 4.68-4.69 |
| HGW 2372.1 (FR4) |
| Product name | Drill φ (mm) |
| H822IS | 5.56-5.57 |
Tip shape (mm)
05 Steel ; L
* Please refer to Table 1 below for details
17 Steel ; L
* Please refer to Table 1 below for details
| table 1 | ||||||
| Tip shape | No. | Center pin
(ФA) mm |
Shielding plan
Jar (ФB) mm |
Height from the board surface
(C) mm |
full length
(D) mm |
Overlap (E) mm |
| 05 05 | 0001 | 1.0 1.0 | 4.0 4.0 | 8.5 8.5 | 31.0 | 2.0 2.0 |
| 05 05 | 0003 | 1.0 1.0 | 4.5 4.5 | 8.5 8.5 | 31.0 | 2.0 2.0 |
| 05 05 | 0005 | 1.5 1.5 | 4.0 4.0 | 11.0 | 33.5 | 4.5 4.5 |
| 17 17 | 0002 | 1.5 1.5 | 4.0 4.0 | 11.0 | 33.5 | 4.5 4.5 |
| 17 17 | 0004 | 1.5 1.5 | 4.5 4.5 | 11.0 | 34.0 | 4.5 4.5 |
| 17 17 | 0006 | 0.64 | 4.0 4.0 | 8.5 8.5 | 31.0 | 2.0 2.0 |
Standard specifications
| F822 | ||
| Center pin | Maximum stroke | 3.5mm |
| Maximum stroke | 3.0mm | |
| Spring pressure at the recommended stroke | 200gf | |
| Initial spring pressure | 100gf | |
| Shielding plunger | Maximum stroke | 2.5mm |
| Maximum stroke | 2.0mm | |
| Spring pressure at the recommended stroke | 450gf | |
| Initial spring pressure | 300gf | |
Material
| Center pin | Shielding plunger | |
| Plunger | Steel ・ Long-life Au plating | BeCu ・ Au plating |
| sleeve | Phosphor bronze, no plating | |
| spring | SWP / Ag plating | |
| socket | Phosphor bronze / Au plating | |
Electrical characteristics
| Center pin | Shielding plunger | |
| Rated current | 1.6A | 6.0A |
Applicable temperature
| Center pin | Shielding plunger | |
| Standard specifications | -40 to + 200 ° C | |
How to order
For order code [F822 05S 0001 L 650]
| F822 | 05S | 0001 | L | 650 |
| Series: F821 | Tip shape: 05
Material: S = Steel |
0001: “No.” in Table 1 | Surface treatment: L = long life Au plating | Spring pressure: 650 = 650g |
| * 1. When ordering a socket, please refer to the name displayed above the socket drawing. Example: For H820 * 2 and F822, if you move the outer contact, the inner contact will move at the same time. * 3, If it is better to move the outside / inside separately, the type such as F835 is recommended. |
||||
* Specifications are subject to change without notice.