OSPH-3 (Center Pitch: 5.1mm/201mil)
OSPH-3 (Center Pitch: 5.1mm/201mil)
- High current
- Rated Current: 50A
- Full Travel: 8.0mm
- Recommended Travel: 6.6mm
- Spring Force @ Recommended Travel: 510gf
Test Probe(mm)
OSPH-3-F (Center Pitch: 5.1mm/201mil)
Tip Styles(mm)
F
E
G (Made to Order)
R (Made to Order)
Mechanical Specification
| Maximum stroke | 8.0mm |
| Recommended stroke | 6.6mm |
| Spring pressure at the recommended stroke | 510gf |
Materials and Plating
| Plunger | Alloy, Gold plated |
| barrel | Brass, Nickel plated |
| spring | Stainless Steel |
| Fixing nut | Brass, Nickel plated |
Electrical Specification
| Rated current | 50A |
| Intrinsic resistance | <0.1mΩ |
Temperature
| Standard specifications | -40 to + 180 ℃ |
Temperature Characteristic
note:
Test Points: Tip of plunger
How to assemble
How to Set Up
How to Wire
Cable with Round Terminal
Suitable cable with round terminal
Product Name : HCC-3-L500-N
| Cable Specs | |
| Length | 500mm |
| Conductor Diameter | 1.8mm (stranded wire) |
| Cable Outer Diameter | about 4.0mm |
| Current | 50A |
| Temperature | -30～+180℃ |
| Cable End | Open |
Interface Pin
Please order if you need a mating side for OSPH-3.
Please refer to the link below for details.
Product name : IP03L4000-01
Barrel Fixing Tool
A tool for insertion and removal of the M3.5 nut used to secure the barrel.
Please refer to the link below for details.
Product name : OSPH3-ST-M3.5
HOW TO ORDER
Series name ― Tip shape
[Example] OSPH-3-E
This product will be shipped in parts.
(Plunger/barrel/spring/large nut/small nut x2)
For installation and wiring, please see “How to assemble”.
* Specifications are subject to change without notice.