KLOSPH-3-E-E (Center Pitch:5.1mm)
KLOSPH-3-E-E (Center Pitch:5.1mm)
- High current
- Rated current :20A
- Full Travel : 2.0mm / 10mm
- Recommended Travel : 2.0mm / 6.6mm
- Spring Force @ Recommended Travel : 100gf + 510gf
- Voltage pin : Inner spring, Current pin : Outer spring
Test Probe(mm)
KLOSPH-3-E-E (Center Pitch:5.1mm)
Terminal with Lead Wire (for voltage pin)
Terminal with lead wire for Φ1.0 round pin
Cable with Round Terminal (for current pin)
Suitable cable with round terminal
Product Name : HCC-3-L500-N
| Cable Specs | |
| Length | 500mm |
| Conductor Diameter | 1.8mm (stranded wire) |
| Cable Outer Diameter | about 4.0mm |
| Current | 50A |
| Temperature | -30～+180℃ |
| Cable End | Open |
Mechanical Specification
| KLOSPH-3-E-E | ||
| Voltage measurement pin | Maximum stroke | 2.0mm |
| Spring pressure at maximum stroke | 100gf | |
| Current measurement pin | Maximum stroke | 10.0mm |
| Recommended Stroke | 6.6mm | |
| Spring pressure during recommended stroke | 510gf | |
Materials and Plating
| Voltage measurement pin | Current measurement pin | |
| Plunger | Copper Alloy,
Gold plated |
Alloy,
HDA Alloy plated |
| sleeve | Brass, Nickel plated | |
| spring | Stainless Steel | |
| nut | Brass | |
| stopper | Phosphorus bronze, Gold plated | |
| insulator | PEEK | |
Electrical Specification
| Current measurement pin | |
| Rated Current | 20.0A |
Temperature
| Standard Specifications | -40 ～ +120℃ |
Temperature Graph
Test Point : Plunger Tip
How to assemble
How to Set Up
How to Wire
Barrel Fixing Tool
A tool for insertion and removal of the M3.5 nut used to secure the barrel.
Please refer to the link below for details.
Product name : OSPH3-ST-M3.5
HOW TO ORDER
Probe
KLOSPH-3-E-E
Terminal with Lead Wire
Terminal with lead wire for Φ1.0 round pin
Cable with Round Terminal
HCC-3-L500-N
This product will be shipped in parts.
(Plunger/barrel/spring/large nut/small nut x2)
For installation and wiring, please see “How to assemble”.
* Specifications are subject to change without notice.