KLOSPH-8-E-E (Center Pitch:12.0mm)
KLOSPH-8-E-E (Center Pitch:12.0mm)
- High current
- Rated current :160A
- Full Travel : 2.0mm / 10mm
- Recommended Travel : 2.0mm / 6.6mm
- Spring Force @ Recommended Travel : 220gf + 890gf/2000gf
- Voltage pin : Inner spring, Current pin : Outer spring
Test Probe(mm)
KLOSPH-8-E-E (Center Pitch:12.0mm)
Terminal with Lead Wire (for voltage pin)
Terminal with lead wire for Φ1.0 round pin
Cable with Ring Terminal (for current pin)
HCC-3-L500-M5/N
HCC-8-L400-M5/N
Compatible cable with ring terminal
Highly flexible and does not affect probe movement.
Use multiple cables depending on the current capacity required.
Two different types of cables cannot be used together.
| Cable Spec | HCC-3-L500-M5/N | HCC-8-L400-M5/N |
| Length | 500mm | 400mm |
| Electrode outer diameter | 1.8mm (stranded wire) | 7.0mm (stranded wire) |
| Cable outer diameter | About 4.0mm | About 11.8mm |
| Current | 50A | 130A |
| Temperature | -30～+180℃ | -50～+90℃ |
| Cable end | Open | Open |
Mechanical Specification
| KLOSPH-8-E-E | ||
| Voltage measurement pin | Maximum stroke | 2.0mm |
| Spring pressure at maximum stroke | 220gf | |
| Current measurement pin | Maximum stroke | 10.0mm |
| Recommended Stroke | 6.6mm | |
| Spring pressure during recommended stroke | 890gf/2000gf | |
Materials and Plating
| Voltage measurement pin | Current measurement pin | |
| Plunger | Copper Alloy,
Gold plated |
Alloy,
HDA Alloy plated |
| sleeve | Brass, Nickel plated | |
| spring | Stainless Steel | |
| nut | Brass | |
| stopper | stainless | |
| insulator | PEEK | |
Electrical Specification
| Current measurement pin | |
| Rated Current | 160A |
Temperature
| Standard Specifications | -40 ～ +120℃ |
Temperature Graph
Test Point : Plunger Tip
How to assemble
How to Set Up
How to Wire
2 pcs x HCC-3-L500-M5/N
2 pcs x HCC-8-L400-M5/N
Barrel Fixing Tool
A tool for insertion and removal of the M8.0 nut used to secure the barrel.
Please refer to the link below for details.
Product name : OSPH8-ST-M8.0
HOW TO ORDER
Probe
KLOSPH-8-E-E
Terminal with Lead Wire
Terminal with lead wire for Φ1.0 round pin
This product will be shipped in parts.
(Plunger/barrel/spring/large nut/small nut x2)
For installation and wiring, please see “How to assemble”.
* Specifications are subject to change without notice.