Receptacle removal tool: FZWZ-SET-001
Receptacle removal tool: FZWZ-SET-001
Receptacle removal tool
FZWZ-SET-001
You can remove the mounted receptacle without damaging the drill hole.
Can also be used for broken receptacles.
It can be removed even under conditions where it cannot be removed by hitting it to the back of the board / block.
Receptacle removal tool
FZWZ-SET-001
You can remove the mounted receptacle without damaging the drill hole.
Can also be used for broken receptacles.
It can be removed even under conditions where it cannot be removed by hitting it to the back of the board / block.
| handle
02-Screw type insert (BZ) 03-Guide sleeve (HZ) 04-Nut
|
|
| [Basic set contents] -Handle & nut (assembled) -Empty case -Pliers -BZ-100-01-1 -HZ-100-01-1* If a screw type insert (BZ) and guide sleeve (HZ) other than those included in the basic set are required, they will be sold separately. |
|
Available threaded inserts (BZ) and guide sleeves (HZ)
| combination | Receptacle |
| BZ-075-01-1 & HZ-075-01-1 | H121; H075; H175; H176; H310; H561; H701; H863 |
| BZ-100-01-1 & HZ-100-01-1 | H722; H727; H732; H752; H756; H757; H772; H875; H878 |
| BZ-100-02-1 &HZ-100-01-1 | H320; H610; H865 |
| BZ-100-02-1 & HZ-100-02-1 | H100; H502; H708; H731; H751; H805 |
| BZ-157-01-1 & HZ-157-01-1 | H762; H866; H867; H887 |
| BZ-157-01-1 & HZ-157-01-2 | H723; H733; H737; H760; H761; H773; H774; H880; H881; H884; H885 |
How to use:
| 1. First, make sure that the handle is locked. Insert the tool into the receptacle, turn it clockwise and tighten until it is firm.
2. Rotate the entire tool slightly counterclockwise to unlock it. Grasp the red arrow and turn the handle counterclockwise.
3. If you keep turning the handle counterclockwise, the receptacle will come off the mounting plate and enter the guide sleeve.
4. To remove the receptacle from the tool, turn the receptacle counterclockwise with pliers. The sleeve can be bent 30-60 °.
5. After use, lower the screw insert to the bottom and lock the handle. |
|