Screw tool with LED signal for switch probe
Screw tool with LED signal for switch probe
LED tool to adjust the optimum switch point of the switch probe
The switch probe can be placed in the correct position with the tool FWZ… SA before the final electrical connection. An integrated LED signal that lights up as soon as the switch circuit closes allows you to adjust the exact switching position.
| probe | 
|
SW | full length | Pattern ΦA | Battery | 
|
| F880 … | × | 2.2 | 147.0 | 3.7 | 2×AAAA1.5V | FWZ880SA |
| F88890S1101U200S05 |
× | 5.0 | 147.0 | 8.0 | 2×AAAA1.5V | FWZ880SA |
| F88890S1102U100S07 | × | 5.0 | 146.0 | 8.0 | 2×AAAA1.5V | FWZ880SA1 |
Batteries are not included in the delivered product
LED tool to adjust the optimum switch point of the switch probe
The switch probe can be placed in the correct position with the tool FWZ… SA before the final electrical connection. An integrated LED signal that lights up as soon as the switch circuit closes allows you to adjust the exact switching position.
Tool to detect the galling and tightness of the plunger
This tool allows you to quickly and easily test the correct function of the contact probe built into the test module or fixture (maximum spring load 600 cN). This prevents the possibility of damage to the connector element.
→ Integrated switch probe (F885) and simple tool for LED display
→ Test height (recommended stroke) can be adjusted with a screw sleeve
→ The spring load can be adjusted by replacing the built-in switch probe.
