Universal Optical Inspection Probe (Light Probe) S2 Spectra USB Sensor
Universal Optical Inspection Probe (Light Probe) S2 Spectra USB Sensor
Light probes and sensors must be purchased as a set. (It cannot be used alone.) ）
Feature
You can distinguish the light intensity of the LED and all visible light and white. Serial digital output is possible directly on the USB port of the PC.
・Not limited to only the five main colors, all visible light and white can be inspected.
・Color coding and light intensity can be measured at the same time.
・Built-in mini USB Type B, capable of serial digital output directly to a PC. Standard USB cable included.
Color discrimination
With our unique streaming technology, we can output the wavelength (1/10th of a nanometer) and intensity of LED colors instantaneously and simultaneously. The output values can be viewed/printed on a PC. Use the included Tera Term communication software and LabView (not included/using VISA technology). The output value does not depend on the light intensity of the LED.
Light intensity
・Serial digital output
・ Millicandela (MCD) support
・Standard type: Light intensity 0.03~18300mcd compatible
・Ultra-low sensitivity type: ~293000mcd compatible
Annotation:
・For extremely bright LEDs, low-sensitivity/ultra-low-sensitivity models are available.
・When the number “4” is indicated: The LED is too dim.
・If the numerical value shows >65000: The LED is too bright. Please use a low-sensitivity sensor.
• Response to light intensity depends on the size of the LED, the diameter size of the light probe, and the distance between the probe tip and the LED.
Supply voltage protection
The Universal Light Inspection Probe (Light Probe) S2 sensor can operate at voltages from 5V to 40V and can also handle reverse voltages up to -18V. In addition to protecting against accidents caused by power supply misconnection, against reverse polarity voltages up to 18 V due to transient inrush voltage when switching DC voltage power supplies, and against inadvertent testing machine polarity errors, it is also possible to support different DC supply voltages of 5~28 V commonly used in general fields (*4.75V or less is not recommended).
Electrical Specification
| Operating Temperature | 0℃～70℃ |
| Applied voltage | +5~28V DC *4.75V or less is not recommended. |
| Current applied | MAX 6mA |
| Voltage protection | Overvoltage 40V, reverse characteristic voltage -18V |
| Response Time | <10mS (serial digital output with simultaneous measurement of color and light intensity) |
* Mini USB type B built-in, standard USB cable included.
Part number
ULP S2 Spectra USB: Universal Light Inspection Probe (Light Probe) S2 Spectra USB Sensor
* Includes USB cable and TeraTerm software.
Other products include:
ULP S2 Spectra USBLS: Universal Light Inspection Probe (Light Probe) S2 Spectra USB Low Sensitivity Sensor
ULP S2 Spectra USBVLS: Universal Light Inspection Probe (Light Probe) S2 Spectra USB Ultra-Low Sensitivity Sensor