Universal Optical Inspection Probe (Light Probe) S2 Unicolor Digital Sensor

From among the five main colors (blue, green, yellow, orange, red) + white, only one color ON/OFF test and color check can be digitally output.

・Only ON/OFF test of specific LEDs.

・Use when you want to measure only one color.

・Quick inspection with digital output.

Only if the LED is a specific color and lit is output as “5” volts; if the correct color is not detected, it is output as “0” volts.

The output value does not depend on the light intensity of the LED.

• Testable colors: one of the five main LED colors (blue, green, yellow, orange, red) or white.

The S2 Unicolor Digital Sensor is not a sensor that outputs light intensity values.

The Universal Light Inspection Probe (Light Probe) S2 sensor can operate at voltages from 5V to 40V and can also handle reverse voltages up to -18V. In addition to protecting against accidents caused by power supply misconnection, against reverse polarity voltages up to 18 V due to transient inrush voltage when switching DC voltage power supplies, and against inadvertent testing machine polarity errors, it is also possible to support different DC supply voltages of 5~28 V commonly used in general fields (*4.75V or less is not recommended).

UPL-S2SCC/”X”: Universal Light Inspection Probe (Light Probe) S2 Unicolor Digital Sensor

* Depending on the color of the LED to be tested, replace “X” with B, G, Y, O, R, or W.