KLOSPH-5-E-E (Center Pitch:8.5mm)
KLOSPH-5-E-E (Center Pitch:8.5mm)
- High current
- Rated current :60A
- Full Travel : 2.0mm / 10mm
- Recommended Travel : 2.0mm / 6.6mm
- Spring Force @ Recommended Travel : 220gf + 660gf
- Voltage pin : Inner spring, Current pin : Outer spring
Test Probe(mm)
KLOSPH-5-E-E (Center Pitch:8.5mm)
Terminal with Lead Wire
Terminal with lead wire for Φ1.0 round pin
Mechanical Specification
| KLOSPH-5-E-E | ||
| Voltage measurement pin | Maximum stroke | 2.0mm |
| Spring pressure at maximum stroke | 220gf | |
| Current measurement pin | Maximum stroke | 10.0mm |
| Recommended Stroke | 6.6mm | |
| Spring pressure during recommended stroke | 660gf | |
Materials and Plating
| Voltage measurement pin | Current measurement pin | |
| Plunger | Copper Alloy,
Gold plated |
Alloy,
HDA Alloy plated |
| sleeve | Brass, Nickel plated | |
| spring | Stainless Steel | |
| nut | Brass | |
| stopper | stainless | |
| insulator | PEEK | |
Electrical Specification
| Current measurement pin | |
| Rated Current | 60.0A |
Temperature
| Standard Specifications | -40 ～ +120℃ |
Temperature Graph
Test Point : Plunger Tip
How to assemble
How to Set Up
How to Wire
Barrel Fixing Tool
A tool for insertion and removal of the M5.0 nut used to secure the barrel.
Please refer to the link below for details.
Product name : OSPH5-ST-M5.0
HOW TO ORDER
Probe
KLOSPH-5-E-E
Terminal with Lead Wire
Terminal with lead wire for Φ1.0 round pin
This product will be shipped in parts.
(Plunger/barrel/spring/large nut/small nut x2)
For installation and wiring, please see “How to assemble”.
* Specifications are subject to change without notice.